DURA-TOP™ SINGLE-COMPONENT BROOM FINISH CONCRETE RESURFACER
H&C™ DURA-TOP™ BROOM FINISH REPAIR is perfect for salt damaged driveways and sidewalks. It’s a cementitious non-slip surface that goes on very thin and has the typical broomed concrete look. It can be used with any H&C™ Color Pack to provide additional color options.
Features & Benefits
- Trowel and squeegee applied topping for interior or exterior surfaces
- Ability to slope and fill spalls and low areas
- High impact, abrasion resistant and aids in slip resistance
- Finish coat is ready to be sealed to protect against staining
- Easy mixing, storage and transporting. Add H&C™’s DURA-TOP™ Color Packs for additional color** Broom Finish Repair uses a gray portland cement so final color will vary from the color chart
Recommended Uses
H&C® DURA-TOP™ Concrete Resurfacer Broom Finish repair is formulated for use on driveways, garage floors, patios, lanais, walkways and pool decks.
Coverage & Drying Time
*Coverage:
- One 50 lb. bag of H&C™ DURA-TOP™ Concrete Resurfacer Broom Finish
- Repair covers: 180-200 sq. ft. @ 1/16” – 1/32” 2 coats recommended
*Coverage will vary depending on the porosity and texture of the concrete
- As product dries, scrape and use leaf blower to remove loose material.
- To complete the installation, two thin coats of H&C™ CLARISHIELD™ Solvent or Waterborne Sealer are required.