DURA-TOP™ FINE TEXTURE CONCRETE RESURFACER

DURA-TOP™ FINE TEXTURE CONCRETE RESURFACER resiste skid marks, mildew and abrasion. This product is ideal for vehicular traffic.

Features

  • Fine texture for smooth lower profile
  • Slower setup time for hot and humid climates
  • Can be used in conjunction with H&C® stains to achieve a variety of unique colors and finishes
  • Durable and cost-effective solution to replacing old, worn concrete
  • Accepts H&C DURA-TOP Color Packs

For Use On

  • Patios
  • Walkaways
  • Pool decks
  • Lanais
  • Driveways
Clear
Product # SizeSDSSKUUPCPDS
60.101109-50 50 LB BAG60.101109-50035777526453
*Coverage: One 50 lb. bag of H&C DURA-TOP Concrete Resurfacer Fine Texture will cover 180-200 sq./coat- approx. 1/16'' - 1/32''. Do not exceed 1/8'' per replacement. Two coats may be required on rough or pitted surfaces. *Coverage will vary depending on the porosity and texture of the concrete. Texture will require a minimum of 4hrs before topcoating. If temperatures are bellow 70°F (21°C) the textured surface will require a minimum of 24 hours drying before application of any topcoat. A sufficiently dried texture system will not leave a thumbnail impression in the surface.

Description

H&C® DURA-TOP™ Fine Texture Concrete Resurfacer is a cementitious topping for both interior and exterior concrete surfaces. H&C® DURA-TOP™ Fine Texture Concrete Resurfacer may be applied by compressed air spray equipment (commonly a hopper gun), by trowel, or by squeegee. Restoration, repair, resurfacing, architectural accenting, and surface protection of existing concrete are all realized through H&C® DURA-TOP™ Fine Texture Concrete Resurfacer. H&C® DURA-TOP™ Fine Texture Concrete Resurfacer is packaged as a white cement mix designed to accept Color Packs to achieve 1 of 30 available colors.

Additional information

COVERAGE & DRYING TIME

*Coverage:
One 50 lb. bag of H&C DURA-TOP Concrete Resurfacer Fine Texture will cover 180-200 sq./coat- approx. 1/16” – 1/32”. Do not exceed 1/8” per replacement. Two coats may be required on rough or pitted surfaces.
*Coverage will vary depending on the porosity and texture of the concrete.
Texture will require a minimum of 4hrs before topcoating. If temperatures are bellow 70°F (21°C) the textured surface will require a minimum of 24 hours drying before application of any topcoat. A sufficiently dried texture system will not leave a thumbnail impression in the surface.

Size

50 LB BAG