H & C® Low VOC Concrete Sealer Solid Color Solvent-based
H & C® Low VOC Concrete Sealer Solid Color Solvent-Based is an opaque, waterproofing sealer that's ideal for the areas in the U.S. that cannot get solvent-based products. This new product line is available in two tint bases and 8 package colors (and a clear!) for 30 useful colors, and has a satin finish.
Where to Use
For exterior use only:
- Concrete Driveways
- Pool Decks
- Walkways/Patios
- Parking Garages
- Athletic Courts
- Block and Stucco Walls
Key Advantages
This exceptional formulation allows concrete to be sealed with a product that will resist salt, UV rays, oil, acids, heavy traffic and won't peel or fade over time. We have designed a totally unique coating that outperforms many xylene-based sealers. It's durable finish will extend the life of concrete and masonry surfaces.
It's easy to apply, just pick your color and brush or roll on, it's that simple. H & C's Low VOC Concrete Sealer Solid Color Solvent-Based products are hot tire resistent and don't require any reduction.
This product is available in the following states: Maryland, Delaware, New York, New Jersey, Pennsylvania, Ohio, Illinois, Massachusetts, Rhode Island, Connecticut, Vermont, New Hampshire, Maine, Arizona, and California (except South Coast CA - Los Angeles area).
-
Product Supplies
- Roller Cover 3/8" nap (soft woven)
- Paint brush
- Paint tray
- Roller frame
- Extension pole
- Stiff broom
- Water source / hose to thoroughly clean surface
- H & C® Cleaner/Degreaser (if necessary)
- H & C ® Etching Solution (if necessary)
-
Product Preparation
All surfaces must be clean, dry and free of grease, oil, paint, sealers etc. Use H & C® Cleaner Degreaser following the label directions, rinse thoroughly and allow the surface to dry.
New concrete must cure for 45 days. All horizontal concrete (new or old), must be etched with H & C® Etching Solution first for proper adhesion, follow label instructions carefully. For very smooth, or highly troweled surfaces with little or no porosity, use H & C® Etching Solution at full strength. Do not etch painted surfaces, the previous coating must be removed prior to applying H & C® Low VOC Concrete Sealer Solid Color Solvent-Based.
-
Product Application
*Apply under dry conditions only! Do not apply if rain is expected within 12 hours following application.
*Air and surface temperature should be between 50° and 90° during application and for 24 hours following.
Sweep the surface with a broom immediately prior to applying, to ensure no foreign substances or particles have fallen on it. Stir thoroughly before and during application.
If you need to "cut in" the corners or edges, do that first with your brush. Use your roller to evenly apply the remainder of the surface, working in one direction. Do not overwork the product - brushing or rolling back over partially dried material may cause lifting of the coating from the surface.
Allow the product to dry 12 hours before applying the second coat (if necessary). Again, being careful not to overwork the product, apply in the OPPOSITE direction of the first coat (perpendicular).
If a clear coat is desired, use H & C® Low VOC Concrete Sealer Clear Gloss Solvent-based; this clear coat is designed to go over the Low VOC solid color sealer and will ensure a long lasting color and finish for years to come.
Dry to the touch: 15 minutes
Foot Traffic in 1 hour
Recoat: 12 hours
Heavy Traffic: 72 - 96 hours
-
Low VOC Concrete Sealer Solvent-based Bombay view MSDS
-
Low VOC Concrete Sealer Solvent-Based Sandstone view MSDS
-
Low VOC Concrete Sealer Solvent-based White Base view MSDS
-
Low VOC Concrete Sealer Solvent-Based Gull Gray view MSDS
-
Low VOC Concrete Sealer Solvent-based Black view MSDS
-
Low VOC Concrete Sealer Solvent-based Pearl Gray view MSDS
-
Low VOC Concrete Sealer Solvent-Based Silver Gray view MSDS
-
Low VOC Concrete Sealer Solvent-based Tile Red view MSDS
-
Low VOC Concrete Sealer Solvent-based Patio Green view MSDS
-
Low VOC Concrete Sealer Solvent-Based Terracotta view MSDS
