H&C® Infusion Industrial Floor Finish

H&C Infusion Industrial Floor Finish is a tough and flexible acrylic designed to dry to a brilliant gloss.   This product is for INTERIOR USE ONLY, and can be applied with a brush, short nap roller or lambskin applicator. 

Where to Use

H&C Infusion Industrial Floor Finish is ideal for high traffic areas such as malls, retail stores, hotels and restaurants, but is for interior use only. 

Key Advantages

Recommended for commercial, industrial and residential use.


Covering 1000 square feet per gallon, this product does not require buffing to bring out the shine.  However, regular maintenance should include buffing which will prolong the life of the floor. 


Product Data Sheet

  1. Product Supplies

    • Brush
      Use a synthetic bristle brush.
      Use a _"-3/8" nap lambs wool roller.
      Tip………………………... .013"-.015"

     ** If using the Solvent Based Sealer, you will need xylene for clean-up.

  2. Product Preparation


    Do not reduce the Infusion™ Industrial Floor Finish. It is best used as the final topcoat on the H&C Infusion™ Solvent Based or Water Based Sealers.

  3. Product Application

    Wait at Least 24 hours after removing residue. Apply under dry conditions only. Application to a damp surface may cause a hazy appearance or loss of adhesion. Air and surface temperature should be between 50° and 90°F for 24 hours following application. It's important not to overwork the product, as to not trap air, which will effect dry time as well as the final appearance. 


    Apply Infusion™ Industrial Floor Finish at a minimum of 24 hours after the sealer has been applied.  2 to 3 coats of Floor Finish is recommended, with a recoat window of 1-2 hours. 


    Maintenance:  worn out traffic areas can be recoated at any time without stripping.


    In high traffic areas, clean the floor with a neutral floor cleaner making sure all residues are removed.  Apply a LIGHT COAT of Infusion Industrial Floor Finish with a mop with a clean mop head.